Added: Aug 21, 2008
From: ravemaster18
Duration: 5:51
READ THIS BEFORE ASKING QUESTIONS!!!!This is a tutorial showing how to change dwell, ROF, and firing modes of the stock board on the ION.Due to Everyone asking the same question, I will now explain this here.-DWELL: Simply put, is the time (measured in some fraction of a second) that the bolt stays in the forward position. Put it too low, you will have air leaks. Too high, and you dont have optimum speed. Setting it to 40-50 is a good range (without a QEV).-ROF=Rate of fire or Recharge. The time it takes to move back into the chamber. The lower this is, the better as far as I know. However, I prefer to keep mine at about 2 or 3 usually.-Now I dont know if these are accurate definitions, but I'm pretty sure its close. So Please, no more asking what dwell or ROF is. GOOGLE IS YOUR FRIEND-FOR MAXIMUM PERFORMANCE: Put your dwell to around 40-50, and your ROF to somewhere around 0-3.-The only way to tell what your settings are on is to turn it down to zero, then go and set it to whatever you want.MODES-Semi: one pull of the trigger, one shot fired-Rebound: Just like Semi only when you hit a certain bps, it ramps up to a higher bps. In my gun it is 5 bps and it ramps to 17 bps.-Triple Burst: One trigger pull, three shots fired-Full Auto: Hold down trigger for consistent 10bps AND YES, i will be putting up disassembly vids, which include how to take out your trigger.AND YES the Video Response I attatched is me. I know that, thank you for letting me know. I was well aware of that from the start. I basically made THAT vid to show what the gun in THIS vid looks like when its actually shooting.
Channel: Sports
Tags: board ion paintball parts pbreview smart stock tutorial
Rating: 4.81 (165 ratings) Views: 51290' favoriteCount='450 Comments: