AMD OverDrive - Performance Tuning Utility Videos

VultureCulture2000X Says:

Oct 11, 2008 - i had this problem too. Download it now agian. it will work

VultureCulture2000X Says:

Oct 11, 2008 - i use both too (gues i'll get my 9600 up to 3Ghz :-)

NattapatZ Says:

Oct 11, 2008 - I've tried 3 times still doesn't work, what version are you using?

VultureCulture2000X Says:

Oct 11, 2008 - I downloaded yesterday 2.1 but now it says "No R700 Chipset found" Before i sued 2.012 (or was it 2.01?)

lukesmart Says:

Oct 11, 2008 - y i cannot run amd overdrive? it show me you have no enough permission to run this program! please try to run as administrator.

darkkittycry Says:

Oct 11, 2008 - It depends on the individual cpu you have and also the motherboard/ram/overall cooling and the PSU. I've got a x2 4200, goin on 2 years @ 2.6 ghz...stress tested. I wouldn't push it much past that. It threw errors. Every setup/system is diff and a lot of folks claiming these super high clock speeds are either not testing for errors, or fibbing about the over-all stability so they can look cool.

ByT3R Says:

Oct 11, 2008 - Reflash the BIOS with an update, check the Asus site, I believe they released an BIOS update.

outpostprime Says:

Oct 11, 2008 - I got an 9600BE. My HT multiplier maxes out at 9x. Also if you look quick his voltages go into the red after he raises his PCI-Ex bus up. Something seems funny here >.O. btw dudes trying to run overdrive but can't. Overdrive only runs at full with AMD700 series chipsets.

monsterrun Says:

Oct 11, 2008 - world champion overclocker....so.ok and what next. stupid media info manipulation.

rheinlander88 Says:

Oct 11, 2008 - indeed, well i have an m2n-32 sli deluxe from asus, it's stable up to 3.250~ but i have to crank all of my case fans up after that because of the heat it puts off,past 3.3 even with all my fans on full, its pushing 54 degrees

mattmonster14 Says:

Oct 11, 2008 - i tried that but the rpms are at its highest2000rpm

XxMofasaxX Says:

Oct 11, 2008 - Your problems are that you do not have a spider platform. You need an AMD 700 series chipset AMD Phenom(there are more CPU's you can use)and an ATi graphichs card.hope this helps you.

polish1stdivision Says:

Oct 11, 2008 - WATCH OUT FOR THOSE CRAPIC CARDS!!

NattapatZ Says:

Oct 11, 2008 - Probably he is using water cooling after he had bump the V-Core.

NattapatZ Says:

Oct 11, 2008 - Holy sh*t, he almost maxed out the V-Core.

yaiknowscrewme Says:

Oct 11, 2008 - its too bad the amd overdrive dont work on vista 64..fuck 32bit

filmbaydotcom Says:

Oct 11, 2008 - Really Far Out....Amazing. Love it.

timmie124 Says:

Oct 11, 2008 - it does just vista is a pain

StevensiTX Says:

Oct 11, 2008 - I would, for example, the beta ver. not for overclock and tuning use I could imagine me that this tool, perhaps by half a year for the peculiar BSOD (1 of 4 vore does not run) with the Phenom CPUs ensured.

gcw89 Says:

Oct 11, 2008 - ok how come wen i go to autoclock i can't click the start, reset and apply settings button?!?!?!....also i can'y move the slider on the nocie mode?!?!...it's like the buttons and the slider are disabled?!?!?...

yaiknowscrewme Says:

Oct 11, 2008 - well my new board(msi790x)any tips for running amd overdrive on vista64 with msi4850's

crispindogs4 Says:

Oct 11, 2008 - Ahh damn, now i want to get a AMD setup....I was going to get a C2D 2.53ghz, and SLI 2 9600's but this makes me want to get a AMD triple Core+ 4870 1gb, just so i can overclock it to hell. lol

lassin1234 Says:

Oct 11, 2008 - Sami Maekinen? Is he from Finland??

DjMelstaitz Says:

Oct 11, 2008 - Please help me..:)Ive got an AMD spiderplatformCPU: Amd Phenom 9650 @ 2.3 GhzGPU: Ati Radeon 4850MOBO: MSI k9a2 CF-FI installed AOD 2.13 but when i run it.. my whole system goes down.It sounds like the CPU cooler stops or something. Anyone knows what i need to do to run AOD?

Jay12341235 Says:

Oct 11, 2008 - lol